I went fishing Sunday evening and caught me a 28″ Snook. Was a blast in the 700.
My first snook in the 700. 🙂
Wavewalk kayak are a stable and versatile fishing platform. My choice is the W700 model that is rigged with Yak Attack and Launch pad rod holder accessories.
I love fishing from my W700 alone or with a friend.
Springtime may be a little chilly north of the Florida Line but we are having wonderful weather in Key Largo.
Anthony from Broward County and his friend, Tom from New York, joined me for a wonderful Wavewalk day exploring the heart of Pennekamp State Park.
Tom had previously capsized a conventional kayak and ruined his cell phone on another non-Wavewalk expedition with another outfitter.
But, he had no problem standing in his W700 while Anthony took a well deserved snooze.
We paddled over 3 miles exploring the flats, creeks, and sunken barge wreck.
Anthony will come back to share a future Wavewalk Adventure with his fiancee. Â He is looking forward to putting a W700 in his garage as soon as he gets a house.
And, Tom will return to New York as a pro-yakker and apprentice commercial fisherman who has mastered the art of catching bait.
The  “Rest of the Story” can be found at capnlarryjarboe.com
We are having so much fun and healthy exercise!
Those of you who are following the conception of the Wavewalk S4 would be interested to see these new pictures from the S4 tooling –
The cast aluminum mold is completed, and the mold makers are finishing the steel frame around it.
Keeping Key Largo mangroves clean – The Wavewalk 700 fishing kayak in a pickup truck capacity.
This morning our mold makers sent us these photos of the top part of the cast aluminum rotational mold for the Wavewalk® Series 4 (S4).
Next part they’ll cast in aluminum is the bottom of the mold.
After that, the two parts will be polished and finished, and mounted in a steel frame that will enable attaching the mold to the rotational molding machine.
The last step before the mold is ready for boat production is coating its inside with Teflon.
The first image (front view) shows a slight difference in the parting line between the top and the bottom of the mold, compared to our initial design. This change will enable our rotational molders to place the W logo higher than we’ve shown in the preliminary images and video that we produced. We’re happy about this opportunity to make our logo more visible.
Overall, we’re on schedule for starting production in April.
