{"id":26610,"date":"2026-02-02T12:05:12","date_gmt":"2026-02-02T16:05:12","guid":{"rendered":"https:\/\/wavewalk.com\/blog\/?p=26610"},"modified":"2026-02-02T12:05:12","modified_gmt":"2026-02-02T16:05:12","slug":"my-transformed-wavewalk-s4-on-the-texas-gulf-coast-is-a-huge-success","status":"publish","type":"post","link":"https:\/\/wavewalk.com\/blog\/2026\/02\/02\/my-transformed-wavewalk-s4-on-the-texas-gulf-coast-is-a-huge-success\/","title":{"rendered":"My Transformed Wavewalk S4 on the Texas Gulf Coast is a Huge Success"},"content":{"rendered":"
By Richard Czajkowski<\/h5>\n

Texas<\/strong><\/p>\n

My attention span for anything other than fishing is getting shorter as I grow older but I forced myself to write a few things down regarding my Wavewalk S4 transformation. I\u2019ll keep it short and provide some photos so others may see what I have done and improve on it to suit their particular needs.<\/p>\n

I want to first thank many previous owners who took the time to document things they did. I have a hard time finding the right description for my Wavewalk S4 now, be it a kayak, skiff or boat. Maybe a little of each. I\u2019ll leave that to the reader, but for simplicity\u2019s sake I\u2019ll refer to it as a boat for this article.
\nSome of my choices in life have been driven by the realization I\u2019m not getting younger and if I don\u2019t do \u201cit\u201d soon I may miss the opportunity, so it was with the S4.
\nI decided I wanted something to get me where fish are here on the Texas Gulf Coast, away from most people, particularly for wade fishing, drifting or poling flats for Redfish and Speckled Trout.<\/p>\n

I wanted to be able to fish standing up, load the boat in my truck, launch it anywhere, store it in my Toy Hauler RV and be large enough for 2 people. I settled on the Wavewalk S4 and the build out was a therapeutic expression of my imagination and abilities, the only lasting benefits of a 45 year construction career. This crazy world is \u201crighted\u201d for the few hours I spend fishing or building something anymore.<\/p>\n

I have used the boat many times this past year since completing it Spring of \u201925. I never owned a boat or tricked a boat out before and in spite of being ignorant of so much I am very satisfied with how it has worked out.
\nIt would be nice to have an easy spot to throw unused top waters, soft plastics and other artificials, and I think a softer piece of rubber instead of the heavier duty mud flap I used below the transom to keep splash from the outboard from breaching the transom might be better but other than that, all\u2019s good.<\/p>\n

Against most recommendations I did go with the 9.8hp Tohatsu instead of the 6hp because of the additional weight I added to the boat and because it has 2 cylinders and runs quieter than the 6hp. Hearing loss was one of those fringe benefits my career provided but I would like to maintain what little hearing I have left.
\nUnder present conditions I can run at 14mph in good conditions without feeling like I should update my will. I define good conditions generally as winds under 12-15 mph. Running into the wind is fine but with the wind at my back the boat is harder to track without lowering speed.<\/p>\n

Pictures say 1000 words<\/strong><\/p>\n

I fitted the hull with plastic utility boxes to keep gear dry.
\nI reinforced the gunnels with PVC lumber and added supports for the deck. I wanted to use a lightweight composite deck but like so much today nothing is made in the USA. When I did come across materials on line I considered using and called the supplier they laughed and said it was manufactured in West Germany and I needed to buy a skid of it and wait for it to be shipped. I wound up (remember my attention span thing) finding a 4\u2019x10\u201dx.090 aluminum sheet and although it was heavier than what I wanted I just used that.<\/p>\n

I fitted the hull bottom with Kynar sheets for protection from oyster beds, sand bars and occasional concrete boat launches.<\/p>\n

Advice for attaching anything to the WaveWalker is to use GOOP caulk for adherence and Flex Seal clear liquid rubber sealant all around the edges.<\/p>\n

The canoe Sponsons and the adjustable pontoons were added for buoyancy and stability when standing and walking on the boat while fishing. The adjustable pontoons are sucked in tight to the boat and in the raised position for driving at normal operating speeds and slid out and lowered while fishing and drifting.
\nI tried running the boat with the pontoons left extended once during an incoming storm on Baffin Bay and lived to regret it. Bathtub waves caught one pontoon and caused the boat to spin to the left literally throwing me off the boat! I survived but I will not make that mistake again. When extended partway the pontoons add huge stability for standing and walking the boat while fishing.<\/p>\n

After priming and painting the underside of the aluminum deck I applied a sea deck covering, hatches, rod holders, seat, utility box, butt seat, lights, chartplotter etc. The deck is bolted thru the gunnels and PVC reinforcing separated by neoprene foam tape to seal the hulls.<\/p>\n

I heavily reinforced the transom as shown in the pictures to support the 9.8 Tohatsu motor.<\/p>\n

After a rough day fishing I accumulate about 3 sponge-fulls of water from inside the hulls.<\/p>\n

Loading and unloading would be really easy if I used a kayak trailer but that didn\u2019t fit my original criteria of storing the boat in my RV toy hauler and being able to load it in my truck and launch from anywhere. An extend a bed cargo carrier and hand winch make loading the boat easier and I can lower the boat by hand just using a rope.
\nThe hardest thing about the operation is loading and unloading the motor and placing it on the transom especially if I\u2019m on a slippery boat launch (one reason I don\u2019t like using a boat launch).<\/p>\n

I stopped worrying a long time ago what other folks think. Everyone has an opinion and everyone is a critic. Ask 10 friends or family their opinion on something and 9 will tell you every reason you\u2019ll fail or it won\u2019t work. When I started my construction career I was overwhelmed and asked my boss, \u201cwhat do you do first and where do you start\u201d? He said \u201cwe start with the footings and foundation, we worry about the rest as it comes\u201d. Great advice for someone so ignorant. I have failed at many things and come to understand that\u2019s the only way we truly learn. By God\u2019s blessing and many lessons learned the boat has been a huge success and I have been fortunate enough to catch my share of fish with it. I can\u2019t explain the feeling when bay dolphins swim alongside me. People are always taking pictures and commenting on how \u201ccool\u201d it is. I always tell them it\u2019s a Wavewalk S4 and I just fitted it out.
\nIf anyone wants more specifics just reach out, or better yet, we can go fishing!<\/p>\n

\"S4<\/p>\n

\"Kids<\/p>\n

\"S4<\/p>\n

\"\" \"Sunset<\/p>\n

\"S4<\/p>\n

\"S4<\/p>\n

\"\" \"big<\/p>\n

\"big<\/p>\n

\"big<\/p>\n

Click images to enlarge –<\/strong><\/p>\n