Windy days make it tougher to fish from almost any boat (even sailboats) but it is often just something that must be dealt with. The usual solution is to use an anchor, which I have been doing. Truth be told though, I wish there was something quicker and less involved.
Despite watching many YouTube videos where they were used I never thought to try one. Maybe this was because they were usually shown in clips about fishing in saltwater flats or bayous. I am usually in shallow water (less than 6 feet) because I primarily fish for bass but I never made the connection….duh!
Trial by Water
I made a quick prototype so I could experience the pros and cons. Suffice it to say, I was impressed! This was the same day I caught those 3 huge fish in my previous story.
Here is a picture of the pole holding my W500-
The wind wasn’t too strong and it worked very well, even though it was only jammed about 6 inches into the mud. The real test came when I went to remove it from the lake bottom; it wasn’t easy! It took some effort, pulling straight up, to remove it. This told me it should work well in almost any wind that I would choose to fish in.
The pole is made of only 3 pieces:
A heavy-duty, fiberglass driveway marker, 1/2 inch diameter and 4 1/2 feet long.
A 3 1/2 foot section of a wooden dowel, 1 inch in diameter
A PVC pipe T-connector
Here is a picture of the fiberglass driveway marker-
Remove the cap from the fiberglass pole
Drill a 3 inch deep hole in one end of the dowel
Insert the fiberglass pole into the hole with a generous amount of epoxy
Attach the T-connector to the other end of the dowel
The finished project with a piece of pool noodle, a tether and a carabiner attached-
Why did I wait so long? 🙂
Easy to make, inexpensive and effective. Using it is much easier, quicker and quieter then any anchor, conditions permitting. I highly recommend you make or buy 🙁 one ASAP.
Some basic practical advice about how to rig you kayak for fishing
Contrarily to you might have heard, there is no such thing as perfect rigging for a fishing kayak, and the reason for it is that kayak anglers differ by their personal needs, fishing style, fish species they go after, etc. Having said that, there are still many opportunities for you to make mistakes, and this is why we generally recommend to go about these things slowly and carefully, without rushing into particular solutions unless you know there’s a good chance that they’d work well for you.
Practically, this means it can be impossible for you to tell in advance exactly what type of rod holders would benefit you the most, and whether you need this type of anchor or another. Same is true for positioning the rod holders, what kind of paddle holders you need, and more.
As a rule, if you fish in saltwater you’d better try to keep your fishing rods dry, which means that either you’ll store them inside the hull for when you pass through the surf, or use tall deck mounted rod holders in the stern. Some deck mounted rod holders have a long leg, which adds distance between your fishing rod and the corrosive sea water. Tube rod holders are easier to use, because you just stick your fishing rod in, and take it out instantly when you need to. However, rod holders equipped with a latch would better secure your fishing rod in its place.
Obviously, if you’re fly fishing you may not need a rod holder at all, but you do want one, it should be of a type that fits fly rods.
As far as positioning the rod holders on your kayak’s deck, our only advice is to take your kayak out and fish from it a number of times before you decide on a new fishing rod. You’d need to make sure that neither fishing rod nor line interfere with your paddling under any circumstance, including when you use your kayak for trolling. You can’t use screws to attach a rod holder, or any other object to your kayak’s deck. The reason for it is that the plastic isn’t thick enough to secure a screw in its place. The alternatives are either using bolts with nuts, or rivets. Bolts have more initial grip than rivets, but they lose it with time, since your kayak is made from polyethylene, which is a relatively soft plastic resin. Remember: Deck mounted rod holders are easy to install, while flush mounted rod holders require that you make a hole in your kayak’s deck, and that hole should be of a certain size and shape. Making such hole isn’t necessarily easy for a beginner.
As for paddle holders, the problem becomes much more complicated: Some kayak anglers insist on using paddle holders that are silent, and that means using paddle holders made from foam. Other kayak anglers must make sure they don’t lose their paddle, because they fish i deep water, and far from shore. This means they must use paddle clips of some kind, or a bungee and hook to secure the paddle in its place. Some kayak anglers like to drop their paddle in front of them while they rush to grab a rod that shows that a fish is pulling on its line, or if they want to make a fast cast because they spotted a fish. Others kayak anglers want to drop their paddle on their kayak’s side, in order to allow them more freedom of movement while they cast a line, reel a fish in, and land it. Again, after fishing a few times you’ll know more about the type of paddle holders, or clips that would work better for you.
Anchors differ by their weight and form: Some have more grip than others, but it doesn’t necessarily mean they’re better, because an anchor with too much grip might get entangled in rocks or roots, and if you don’t manage to release it you’ll have to cut its line and part from it. As a rule, kayak anchors should weigh between 1.5 lbs and 5 lbs. The heavier anchors are for moving water, such as streams or the ocean, and the lighter anchors are for ponds, small lakes and slow moving rivers. Here too, you can add more functionality at a price of adding complexity: Anchor pulleys (vertical) and anchor trolleys (horizontal) may serve you well if they fit some specific need, but they could just make things harder for you if you don’t need them.
And what about a milk crate? What seemed to be an obvious storage solution in old fashion sit-in and SOT fishing kayaks is no longer needed in the W500 Wavewalk kayaks, simply because this new generation of fishing kayaks offer so much internal, accessible and dry storage space, as well as a lot of deck space, which make the milk crate redundant.
Should you add a seat to your kayak, and what type? The answer to this question is rather simple: If you happen to own a sit-in or sit-on-top kayak (SOT), you must outfit it with a seat (and footrests, in case those are not molded-in). No kayak seat may offer what it promises, that is a comfortable ride, and the reason for it is explained in this article about kayak ergonomics »
If you’re about to get your first W-kayak, don’t hurry to outfit it with any kind of seat, because you’re likely not to need it at all, as most W kayak owners have found. Just take your time to get used to the riding position, sitting, and standing, and sooner or later you’re going to forget about your seat project.
Rudders and kayaks – an unhappy marriage… Aboriginal kayaks were not equipped with rudders, because the people who crafted and paddled them were supreme paddlers, who spent their childhood paddling. Unless you fit this description, you’re likely to need a rudder for your sit-in or SOT kayak, because in addition to your own relatively skill level, these boats track very poorly, because their design depart greatly from the sleek proportions of Inuit kayaks. A rudder is a pain to activate, and requires your constant attention. It also has a nasty tendency to harvest seaweed, and get stuck in rocks, roots and other underwater objects. And if you’re planning long trips, you should be aware of the fact that a rudder would slow your kayak down by an average of 10%. Luckily, W-kayaks do not require rudders at all. Since the first W kayak appeared in 2004, only one W kayaker installed a rudder in his W kayak, and that’s basically because he sails it. No other W kayak paddler or angler has added a rudder to their W kayak, simply because no one saw any reason to do so. W kayaks track like no other kayak, even under strong wind.
Outriggers – Yes, no, what type, and how many? There is no need for you to add outriggers to a W kayak, unless you’re planning to go at very high speed, using a powerful outboard gas engine, or a big and powerful sailing rig. A normal, small electric trolling motor does not necessitate you add outriggers to your W kayak. W kayaks are stable enough to go in moving water, as well as enable you to paddle and fish standing up in confidence and safety that you won’t find in any other kayak – including those who have outriggers. If you decide to increase your W-kayak’s stability, remember you don’t necessarily need a pair of outriggers to stabilize it, and in many cases a single, large size outrigger would suffice.
What about a motor? It’s possible to add an outboard gas engine to a W kayak, but in case you’re interested in doing so, you must take into account adding flotation as well, and the same is true for an electric motor. As a rule of thumb, we would advise patience and cautiousness with any motorizing project. To begin with, you may ask yourself “do I really need this thing?” – Try to answer this question after using your new W-kayak in a human powered mode. You may reach the conclusion that your W kayak is fast enough, easy to paddle, and takes you where you want to go – and back… Electric trolling motors seem perfect, but they add weight and complexity to your W-kayak, and may not be worth the trouble after all. Read more about motorizing your kayak »
This section provides basic, ‘getting started’ tips and advice on using your Wavewalk® Fishing Kayak, and it offers links to other parts of this website that contain in-depth information. It is written in a sequential order of use, as much as possible.
Always wear a Personal Flotation Device (PFD) when using your Wavewalk® Fishing Kayak. Do not wear heavy shoes or rubber boots, waders or any heavy or cumbersome clothes since they might prevent you from getting back into your boat or swimming back to shore in case you fall overboard. Never drink alcohol or take medication that might make you drowsy before and while kayak fishing.
Car Topping and Loading
You don’t need a special kayak rack since the Wavewalk® Kayak fits on top of any car rack.
Have one tip of the boat lean on the car rack and push upward and forward until the boat is on top of the car:
The easiest way to attach your Wavewalk® Kayak to the car rack is with its cockpit facing upward but you can also attach it with the cockpit opening facing sideways when transporting two Wavewalk® kayaks. Use strong straps, bungee cords or rope to secure the kayak to the car rack. Note: All plastic boats are sensitive to the combination of excessive heat and pressure – Make sure your Wavewalk® Kayak doesn’t come in direct contact with exposed metal parts heated by the sun.
The simple way to attach a Wavewalk® kayak to a regular car rack:
fishing kayak attached on top of vehicle
Carrying (Portaging) – One Person
On your shoulder (see ‘Downloading’) – For short and medium distances. Over your head with your head between the hulls and each hull supported by one of your shoulders and one of your hands – For short, medium an long distances. On your side: Hold the boat on its side with one hand gripping the cockpit rim in one hand supporting the lower hull – For short distances only. Dragging: Attach a rope or a leash to the boat and pull it behind you. This way you can portage for long distances and in difficult terrain. If you don’t drag it over asphalt, concrete or oyster beds the bottom of your Wavewalk® Kayak’s will be only mildly scratched, in a way that will not affect its performance. For short, medium and long distances. Watch video » Wheels: Also, see ‘Transportation’ section of the ‘Outfitting’ page »
Storing Your Fishing and Camping Gear On Board
The Wavewalk® 500 kayak offers you 8.8 cubic feet (66 gallons) of dry and accessible storage space, which is more than any kayak does, including expedition style kayaks. Take the time to think and experiment before you take any definitive action like drilling, cutting or buying new gear. Finding the optimal solution for placing and attaching your fishing gear in your W Fishing Kayak might require more than one fishing trip simply because you have much more storage space inside and outside the boat, and therefore more possibilities to consider, test and evaluate. In general, it is advised to store heavier gear such as fish tank, battery etc. in lower places, and not to fill the cockpit with large size objects that may be attached on top of the hulls’ tips in front or behind it. You may want to read this website’s ‘Outfitting’ section as well as customer stories.
1. Regular: Put the boat halfway in the water and facing forward. Step into the cockpit from behind (no need to step in water) and install yourself on the saddle. You can get the boat to move forward by either placing a foot on the front part of the spray deflector and ‘kick’ and/or by pushing your paddle backward. When the boat is sufficiently in you can pole and paddle forward. Similarly, you can put-in standing.
2. Surf launching: Standing in the water beside your Wavewalk® Kayak and lean over it while holding the two sides of the spray deflector. Then hop inside and start paddling.
This old video shows a 2006 W300 (smaller series, discontinued in 2010) launched in the surf:
3. Launching from a dock: Hold the boat in parallel to the dock and carefully get inside, one leg after another. 4. Seal launching (Warning: only for advanced paddlers): Put the kayak on a rock or a slope facing the water, position yourself in the back of the cockpit only in the Riding position, and slide down to the water while leaning backwards in order to minimize the impact. It’s possible to perform this trick from a dock or from a deck of a bigger boat.
You don’t ride a chopper the way you ride a dirt bike, and canoeing is different from kayaking in a number of ways. in paddling there are some similarities between canoing and W kayaking, and other things that W kayaking shares with regular kayaking. In addition, there are also things that are unique to W kayaking. It is important to keep this in mind before you begin paddling your W Kayak in order to improve both your experience and performance.
Getting started: It is advised to get used to the boat on flat water before venturing to moving water. As a beginner always make sure you are in the Riding (Mounted) position:
Riding, or ‘Mounted’ Position
Your legs are on your sides and deliver optimal stability, power and control
Riding (Mounted) – The Best Position For Learning, Balancing and Controlling Your Wavewalk® Kayak: Beginning W Kayakers should start in the Riding position, that is with their legs and feet on both sides of the saddle in a direct line below their upper body (see picture on the right). Riding is the stablest position and it offers best control over the boat. This is especially true if you don’t have good canoeing experience and you’re not used to balancing a boat with your legs. Your experience with regular kayaks (SIK or SOT) may help you in some ways but it does not guarantee that you’ll learn faster because of the differences between ordinary kayaking and W kayaking. Riding is also very comfortable once you get to used to it.
The Riding or ‘Mounted’ position is particularly stable and effective because all the muscles in your legs from your feet through your ankles, knees and hips can deliver quick, accurate and powerful reactions. Riding is a position that’s comfortable enough to allow horse riders to travel for thousands of miles during many months. In past centuries, a cavalry man would throw javelins, shoot arrows or slash his enemies with his saber – all while being mounted on his horse’s saddle, while a cowboy would use his lasso to catch and control cattle from the same powerful and stable position.
The Riding position: This video shows in slow motion how the paddler maintains his stability while powerfully tilting his Wavewlk® 500 kayak:
Balancing: The right way to balance yourself in your Wavewalk® kayak is to hold the paddle with both hands and use your hips, thighs, knees, ankles and feet to respond to the boat’s lateral movement by gently shifting your weight from one leg to the other and keeping your upper body upright and centered. Leaning with your hand on the spray deflector is not practical at all. Also, unlike in ordinary kayaks keeping one of your paddle’s blades in the water is not recommended for balancing your Wavewalk® Kayak since it is better if you get used from the beginning to rely on your lower body to perform this task.
Note: The new W700 car-top boat is so stable that it hardly requites any balancing.
Do not confuse Riding (mounting) with Sitting – In the Sitting position your legs are positioned in front of you – see Figure 2. Sitting is not a recommended position for beginning W kayakers.
Figure 2 The Sitting Position
Your legs are in front of you and therefore deliver less stability, power and control
For more information on the different paddling positions go to the ergonomics section.
Getting used to the Wavewalk® 500 Kayak is personal and can take from a few minutes to several hours. It’s advised not to try to rush things and not to expect to become an expert Wavewalk kayaker after one paddling session – for many people it takes more time. There is a lot you can achieve with a Wavewalk® kayak that you can’t achieve with a regular kayak, and it’s only natural to need some time to learn it.
Positioning Yourself Along the Saddle
You can move forward and backward along the saddle according to your needs and according to circumstances. For example, when paddling against eddies and waves you can sit in the back of the cockpit and by that lift the bow, which will make paddling easier, since you’d be going over the waves instead of through them. For more details visit this website’s surf and ocean section.
You’ll find that poling your W fishing Kayak in shallow water is easy. We recommend that you pole using a long and sturdy paddle such as our Wavewalk® PSP, or a poling pole. The advantage of the long and sturdy Wavewalk® paddle is the fact you can use it for both poling and paddling.
Steering by Leaning Into the Turn
You don’t need a rudder in order to turn sharply in your Wavewalk® Kayak: Turning is very easy if you lean into the turn and paddle on the exterior side. Caution: Since this is an unusual thing in paddling it is advised that you first get used to controlling and balancing the boat before you start leaning it into the turn. It is advised to do it carefully and gradually. Getting used to turning by leaning into the turn is personal and can take anything between a few minutes to several hours. You can lean into the turn in all positions but you can lean more effectively in the Riding, Kneeling and Standing positions, and less in the Sitting position.
By the time you start practicing leaning into the turn you’ll probably know that beginning in the Riding position is best for you.
The ability to lean on one hull and paddle alongside the other hull is also useful when paddling in the surf. For more information visit this website’s surf and ocean section.
Easy, Rudderless Tracking In Strong Wind
How to get the wind to help you track – You can move fore and aft along the saddle, and thus displace your Wavewalk® kayak’s center of gravity (CG). The heavier end will tend to point into the wind, while the lighter end will tend to trail. With occasional, minor adjustments of your position along the saddle, you’ll be able to track perfectly.
This kayak is the only one that offers true stand up paddling and fishing for everyone, in real life conditions, in the sense that you don’t have to be young and fit to do it, and once you get used to it, you won’t need to waste time and energy in continuous balancing efforts. True stand up paddling and fishing also means that in case you lose balance, you can simply, easily, instantaneously and intuitively regain your balance just by dropping to the Riding position on the kayak’s 14″ high saddle. This is critical for both convenience and safety. And needless to say tat rising from the lower position to standing is a breeze. To paddle standing adults need a paddle that’s longer than ordinary kayak or canoe paddles. Our company offers two extra long and rigid stand up paddles that work perfectly for paddling in the lower positions too. Children, teenagers and some people may find it as easy as paddling in lower positions but for most adult paddlers stand up paddling is a skill that can take some time to acquire, like any other skill, including kayaking. It is advised to begin practicing stand up paddling on flat water before venturing in moving water.
You can easily motorize your Wavewalk® kayak by outfitting it with either an electric motor or an outboard gas engine. We offer standard transom mounts for 15″ (short) and 20″ (long) propeller shaft models. We strongly recommend using long (20″) shaft motors rather than short (15″) ones. Motorizing your Wavewalk® kayak would greatly expand your range of travel, and could increase your safety since getting back to shore in bad weather and against a strong current is easier when motorizing than while paddling. Our website features a special section dedicated to motorized fishing kayaks »
Before going on a motorized trip, verify that the wide wooden bolt knobs that secure the motor mount to the boat are safely tightened to the maximum. Failing to tighten the bolt knobs could result in unwanted vibrations and noise. If you feel such unusual vibrations and/or hear unusual noise, stop the motor, turn around, and tighten the bolt knobs to the max. Driving with loose bolt knobs is hazardous, similarly to driving with the motor’s clamp screws loose, and it could result in an accident.
Never operate the motor without the motor’s stop switch (“kill-switch”) attached to your arm.
For motor operation and maintenance please refer to the motor’s owner’s manual.
Scouting and Sight Fishing
Scouting is best done on flat water while paddling in the standing position. Since scouting is usually done at a slow speed without much maneuvering it is advantageous to learn how to paddle on one side of your kayak using a canoeing style J-stroke to keep tracking.
Many anglers are concerned about spooking the fish by making unnecessary noise, such as when they drop their paddle in order to seize a fishing rod and cast a fly or a bait at a fish they’ve just spotted. These anglers usually outfit their W kayak’s cockpit with thick foam along its rim (coaming), which dampens the impact and noise of the paddle when they let it down to rest there, sometimes in a groove they make in the foam.
You can easily drop an anchor is in the space between the hulls’ tips in front or behind the cockpit – according to your fishing needs. You can also make an adjustable anchor trolley system as shown in this website’s ‘outfitting’ section. If you fish in a stream you can use an anchor to slow your drifting downstream or a heavier anchor to keep your kayak in place. Some W anglers use an anchor pulley. For flat shallow water, using a stakeout pole can work better than an anchor.
The Wavewalk® Kayak offers you the ability to cast to longer distances, which presents two advantages: 1. Being able to cover more water from a stationary position before you need to move your kayak 2. Some fish species can sense the presence of your kayak nearby and therefore are better caught from a distance.
You can cast to longer distances with any gear from the powerful riding position. The standing position is also good for casting to longer distances. Casting from the sitting position is less powerful, although it still enables better casting than the traditional kayaking position does in other kayaks.
You will find that netting smaller catch is very easy, and by gripping the fish through the net the hooks can be removed with minimal damage to the fish. As for bigger fish, dropping them in one of the hulls will assure that they don’t slip away and will give you the possibility to deal with them on your own terms.
Reentering Your Wavewalk® Fishing Kayak From Deep Water
From the back: To enter your Wavewalk® Fishing Kayak from the back you need to position yourself behind it and grab the hulls’ two tips. Hoist yourself upward and start crawling upward and forward with your legs positioned on both sides of the boat. Use your legs to help you balance the boat. Doing it slowly and carefully is better than trying to rush things. After you have going forward enough over the cockpit just let your legs drop into the hulls, and position yourself in the stable Riding position. It is possible to perform this entry without help from other people if you do it slowly and carefully. Obviously, it is easier if someone can help you balance the boat by holding one or both handles in the bow.
From the side: Position yourself on the side of the kayak with one hand holding the spray deflector. Push yourself upward and grab the spray deflector on the other side of the kayak, then quickly move one leg up and on top of the cockpit while your head and shoulders point in the other direction, so your body is in an angle and almost sideways to the kayak. This method requires more agility and fitness than reentry from the back of the kayak. If it doesn’t work and you feel the kayak isn’t stable, slide quickly back into to water, and then try again, or try reentering the cockpit from the back of the kayak. If one hull has water in it, it can serve as a counter-balance, and you should reenter the kayak from the other side.
Demo video contributed by Berny Marsden, from the UK:
Berny designed and built this DIY Wavewalk with some help from us, and he named it “Banana Split” 🙂 . The load capacity and dimensions of this boat are comparable to those of the W700.
Before you go back into the cockpit make sure the paddle is secured, and it’s not in your way. Practicing will improve your deep water entry skills.
Your Wavewalk® Fishing Fishing Kayak offers some exceptional advantages in shallow water, so we’ve dedicated a special section of this website to shallow water fishing
Surf And Ocean
This website has a special section dedicated to surf launching, surf playing, paddling, surfing and beaching in this challenging, fun environment. Please visit our our surf & ocean page.
Normally the interior of the boat stays dry, and if some rain or spray gets in it is drained to the bottom of the hulls where it does not bother you. Similarly to other small boats, when you’re on the water in your Wavewalk® Fishing Kayak you can drain it using a small bucket, a hand operated bilge pump or an electric bilge pump. Some W kayakers use a big sponge or a big towel for this matter. When the W Fishing Kayak is on dry land you drain it in no time just by grabbing the handles and overturning it. The water will drain out from the special drainage holes in the top side of the cockpit rim.
When beaching (taking out) you normally don’t have to step in water: When paddling to shore position yourself in the back of the cockpit – This will raise the bow and make it easy for you to advance high enough on dry ground. When stepping out from the boat do it from the front so you don’t have to get your feet wet.
Tandem (Two Adults)
Paddling in Tandem
-Two children weighing less than 100 lb each can hardly be considered a real tandem in terms of the special challenges facing two full size paddlers i.e. adults.
Paddling any kayak in tandem is always a challenge, but paddling a Wavewalk® Kayak in tandem is easier. Before anything, do not attempt to paddle a Wavewalk® 500 Kayak in tandem unless both paddlers are experienced W kayakers. The heavier and more experienced paddler should preferably ride in the back of the cockpit, where he/she can see what the new paddler is doing, instruct him/her and compensate for errors if necessary. Paddling a Wavewalk® 500 Kayak in tandem is not recommended if one of the paddlers weighs over 200 lb, and if the total weight of both paddlers exceeds 350 lb. Do not paddle in tandem in any position other than Riding, which is the stablest, and the one that offers best control. Do not attempt to paddle a Wavewalk® 500 Kayak in tandem at sea or on moving water unless you’ve gained considerable experience in W Kayaking in general, and in tandem W Kayaking in particular.
You and your padding partner can paddle a Wavewalk® Kayak in tandem using either two canoe paddles, one canoe paddle and one kayak paddle, or two kayak paddles -What really matters is your teamwork, ability to understand each other and your individual paddling skills. Note: The W kayak is a small vessel, and like any other vessel it becomes slower and less stable when overloaded. You need to take into consideration these factors when planning any tandem activity with your W Kayak. Most importantly, make sure you’ve read about the weight limitations for this kayak » Also, beaching in tandem is more difficult than solo because you can no longer raise the bow effectively. W kayaking in tandem can be a lot of fun if performed correctly and safely.
Fishing in Tandem
Generally, it is not advised for two people to sit in a small boat and fish together since this is an accident prone situation. This is especially true for young and inexperienced fishermen. It is possible for two people fishing together from the cockpit of a Wavewalk® 500 fishing kayak to have one fisherman face the bow while the other faces the stern. This leaves more room in front of each of them for casting and reeling the fish in, but in any case both fishermen will not be free in their actions and they must be very careful in everything they do, and constantly aware of their partner’s actions. It is possible to paddle this way for short distances but only if the front passenger (I.E. the one facing forward) is paddling. Since the W fishing kayak is totally symmetrical from bow to stern the two passengers can take turns in paddling. For example: while the one at the bow is paddling forward the other that’s facing backward can cast or troll providing he/she does it carefully. Turning inside the cockpit is easier for lightweight passengers, but heavier passengers can learn to do it too after some practicing. It is important to do it in full coordination with the other passenger, and advised to practice in shallow water first.. It is best for people fishing and/or paddling in tandem to do so in the riding position, which is stabler than sitting. It is not advised to stand in this kayak while two people are fishing from it.
Note: Unlike the W500, the new W700 is a full-tandem paddling, fishing and motor boat
Storing the Kayak
The proper way to store this kayak is with its cockpit facing up.
Do not store this kayak with anything heavy resting on top of it, or with anything pulling its hulls apart. It’s best to cover the cockpit with a tarp, in order to prevent rain, snow, animals and insects from getting inside.
Cold weather You can store this kayak outside even in cold weather but you’d need to make sure it doesn’t get filled with water or snow, since freezing water expands and could damage it.
Hot weather You can store this kayak outside in hot weather and direct sunlight, although storing it in the shade is better in the long run.
A Wavewalk® Kayak requires no maintenance, and you can store it outside in cold and hot weather. The W Kayak is rotationally molded from High Density Polyethylene (HDPE) which is stronger, more durable and more resilient than other materials used in kayaks and canoes. This is why it is unlikely to get damaged, but it also makes it difficult to repair so it is not advised that you try and perform repairs by yourself without first consulting with us.
You will find that your Wavewalk® Fishing Kayak offers many possibilities and is very easy to outfit. For more information please visit this website’s outfitting and rigging page.
Exceptionally tall and/or very heavy people, and/or people with certain physical disabilities can find it more difficult to paddle traditional canoes and kayaks. Similarly, such people might experience some difficulties in W Kayaking that most people won’t experience, or would experience to a lesser extent.
These limitations are true mainly for the 500 series, while the 700 series offers practically anyone to paddle, solo and in tandem
Attaching outriggers to a fishing kayak offers limited benefits in terms of initial (primary) stability, and even less so with secondary stability. Outriggers significantly impede the kayak and make it harder to paddle. Outriggers are also known to limit the kayak’s mobility in shallow water where weeds and grass grow. Outriggers also reduce the kayak’s ‘fishability’ by snagging your lines.
Please don’t hesitate to contact us by phone or by email if you need additional information.
We’d welcome your comments and suggestions about the design of this page, and what additional information and links we should include in it.
Not getting in much fishing in during the coldest part of winter. Have been on local waters a few times this winter, but had to break through ice on the lake during my last outing. Looks like I’ll have to wait for the thaw now. The bass in my area seemed pretty darned elusive during the cold anyway. Did manage to make and test a modification to my W500, though. See the pics of anchor trolley and anchor system.
Some time ago I saw some posts on the blog for anchor rigging, but didn’t appreciate the need. My pre-Wavewalk fishing experience was always on a partner’s bass boat with a trolling motor for station keeping. Had several frustrating experiences in my W500 juggling paddle and rod while the wind blew me around. Found myself curtailing trips if wind was going to be up. I certainly don’t want to limit my fishing to dead calm days (or if fishing in any moving waters), and now wouldn’t go out without an anchor and/or a stakeout pole.
Got most everything for the trolley and anchor from my local home improvement store and Walmart. Hopefully, my spouse won’t notice that I cut up our daughter’s pool noodle for the rod keeper & float combo. Easy to deploy – just drop it into the water and the line spins out. When sufficiently spooled out, loop line into j-hook slot at end of PVC pipe and clip carabiner at other end of PVC pipe into trolley ring. If you need to quickly detach anchor and move, do so and return to anchor float later. I got the idea from one of John Oast’s Fishyaker videos.
I love figuring these things out and fabricating them myself.
Saw comment about strapping my DIY rod holder to the saddle bracket and how that might stress screws holding saddle bracket. Thought of that and added 1” stainless washers to the saddle bracket screws to spread stress.
I wanted to share some of my modifications and to let you know that I have logged about 40 hrs. in my boat…..I named her V ger. (Star Trek) Also, I wanted to ask you about the necessity of the pink noodles. I forgot why they are there.
And, I love , Love , My boat.
Pole holder made with 1×3 wood, painted and decorated. I used PVC 45 degree bends and bolted them onto wood frame.
The pink barbell is my temporary anchor…
Bailer, Dollar Store squirt gun. Clips from the Dollar store too.