Spray shield for my Wavewalk S4?

The spray shield that Wavewalk developed years ago for the 500 series is made from a 48″ x 12″ Polycarbonate (PC) sheet.
This accessory bends around the front of the W500, and stops spray from getting into the cockpit from the space between the front hull tips, as well as from their sides.
Since there isn’t that much difference in design and size between the W500 and W700, this spray shield works for the latter as well, and it allows for driving both motorized kayaks at high speeds in choppy waters.

But the S4 is different –
To begin with, the S4’s front deck blocks most of the spray generated at the bow while bumping frontally into waves at high speeds, and let’s not forget that the S4 is faster than the W700 and W500…
But the S4’s front deck is less effective for blocking spray generated on the sides of the boat while it hits waves in diagonal. This is by no means a major problem, and the worst outcome can be that a passenger sitting at the front of the cockpit could get a little wet when the boat goes at high speed in choppy water.
This little problem can persist even with a W500 Spray Shield attached to the S4 –
Since the S4 skiff is 9″ wider than the W500, a 48″ long spray shield bent and attached at the front of its cockpit won’t bend enough to protect both its front and its sides.

To achieve their goal, an S4 owner who wants to outfit their boat with a totally effective spray shield would have to make one from two sheets of 48″ x 12″ Polycarbonate – One sheet in the center, and a 24″ x 12″ extension riveted to each side of that central sheet, forming together a 96″ long sheet.

The DIY designer can cut the Polycarbonate, and reduce the height of the spray shield’s ends, and thus give the final product a cool, professional look that’s higher at the center and tapering down on both ends, namely backward when attached to the kayak’s cockpit (See images below).

Drilling holes in a Polycarbonate sheets is easy, and so is riveting lashing hooks to it.
These hooks will serve to attach the spray shield to the deck with a shock cord (bungee), in a way that makes attaching and detaching easy and quick.
Other methods can serve as well to attach the spray shield to the S4.

We recommend using Polycarbonate sheets that are 0.1″ thick or slightly thinner, in order to keep the end product lightweight and assure its flexibility.

Polycarbonate (PC) sheets are not expensive, and they can be purchased online.

 

W500 Spray Shield made from one 48″ x 12″ Polycarbonate sheet

 

The W500 Spray Shield bends easily without heating

3 thoughts on “Spray shield for my Wavewalk S4?”

  1. First article in several months… Moving from Massachusetts to Rhode Island and the renovation projects that followed have taken a lot of time from me.

    Yoav

  2. Hope you’re getting settled in Yoav, and ready to explore your new home territory with the S4.

  3. Hi Gary,

    Slowly but surely 🙂
    Too slowly for my liking…

    Yoav

Leave a Reply